Plastic film protects surfaces against novel coronavirus on contact

Laboratory tests showed film containing silver-silica nanoparticles to be capable of eliminating 99.84% of SARS-CoV-2 particles after exposure for two minutes. Credit: Promaflex

An adhesive plastic film designed to protect surfaces such as doorknobs, handrails, elevator buttons, and touch screens inactivates the novel coronavirus on contact.


The manufacturer of the film is Promaflex. It has nanoparticles of silver and silica built into its polyethylene structure, thanks to technology developed by Nanox, a Brazilian company based on São Paulo and supported by São Paulo Research Foundation, through FAPESP’s Innovative Research in Small Business Program (PIPE).

In tests conducted at the University of São Paulo’s Biomedical Sciences Institute (ICB-USP), which has laboratories certified for Biosafety Level III (BSL-3), the film proved capable of eliminating 99.84% of the viral particles after two minutes of contact.

“The technical standard governing measurement of antiviral activity on plastic and other non-porous surfaces, ISO 21702, requires demonstration of this capability within four hours. The plastic film with silver-silica nanoparticles did so far sooner, and its virucidal action increased over time,” Lucio Freitas Junior, a researcher at ICB-USP, told.

The trials performed to measure the adhesive plastic film’s capacity to inactivate the novel coronavirus were in line with ISO 21702:2019. Samples of the material with and without silver-silica nanoparticles were kept in direct contact with SARS-CoV-2 for varying amounts of time. After the stipulated periods, the viral particles found in the material were removed and placed in contact with Vero cells to measure the infection and replication rate after exposure to the film. Vero cells are derived from the kidney of an African monkey and widely used in microbiological cultures.

The viral genetic material was quantified by PCR, showing a reduction of almost 100% in copies of SARS-CoV-2 after two minutes of exposure. “The silver-silica nanoparticles are added to the polyethylene during its production, so the film’s antimicrobial action persists throughout its working life,” said Nanox CEO Luiz Gustavo Pagotto Simões.

Nanox recommends the use of the film for up to three months, however, after which it may wear out from excessive contact.

Face covering

The adhesive film is the second plastic material with silver-silica nanoparticles marketed by Nanox for protection against COVID-19.

In partnership with toymaker Elka, the São Paulo-based firm has developed a reusable face covering made of flexible thermoplastic material similar to rubber, and coated with the additive as a surface layer. The mask promises to confer a higher level of protection against the novel coronavirus.

In early August the product was approved by ANVISA, Brazil’s public health surveillance authority, as a FFP2 mask for use in personal protective equipment (PPE).

“The company won approval for the filter used in the mask in compliance with NBR 13698 [the Brazilian technical standard for filtering half-masks used as respiratory protective equipment of the non-motorized air purifier type] and the mask is registered as PPE,” Simões said.

The silver-silica nanoparticles have been used to coat fabric for anti-COVID-19 apparel. In laboratory tests, the coated material also proved capable of inactivating the virus after two minutes.

The additive has been used directly in apparel and fabric made by several industrial firms (such as Santista, Malwee, Cedro Têxtil and Delfim Tecidos) under a licensing agreement with Nanox.

“The fabric was a disruptive case for us,” Simões said. “We changed our business plan and began licensing the use of our brand in addition to selling the additive. In some cases, we earn royalties on sales of products that use our brand.”

Textiles are impregnated with the silver-silica nanoparticles using a process known as pad-dry-cure. Padding is a coating technique commonly used as a textile finishing method.

Repeated washing can lead to loss of the additive. “But we’ve tested excessive washing of fabric with the additive and found no loss of efficacy,” Freitas Junior said.


Researchers develop fabric capable of eliminating SARS-CoV-2 by contact


Citation:
Plastic film protects surfaces against novel coronavirus on contact (2020, October 16)
retrieved 16 October 2020
from https://phys.org/news/2020-10-plastic-surfaces-coronavirus-contact.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.


Speak Your Mind

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Get in Touch

350FansLike
100FollowersFollow
281FollowersFollow
150FollowersFollow

Recommend for You

Oh hi there 👋
It’s nice to meet you.

Subscribe and receive our weekly newsletter packed with awesome articles that really matters to you!

We don’t spam! Read our privacy policy for more info.

You might also like

How Much Do Crowds Contribute to Covid? It’s Complicated

“Both policy makers and voters need to know that we still cannot answer most...

Fitness wearables provide early-warnings for Covid symptoms, study finds...

WASHINGTON DC: Preliminary research has found that constant stream of data from wearable devices...

The Lion, the Polygamist, and the Biofuel Scam

How a member of a breakaway Mormon sect teamed up with a Lambo-driving, hard-partying...